Windows NT 3.51

   Introduction:
   -------------
   This document describes the procedure to install Windows NT v3.5x driver
   for SURECOM EP-312 ISA PnP Ethernet Adapter.

   Location of Driver:     \WINNT351\PNPNT.SYS   (for NT3.51)

   Installing driver procedure on Microsoft Windows NT :
   -----------------------------------------------------
   When you are in Windows NT :
   1. In the Main group of NT, select the "Control Panel" icon.

   2. In the Control Panel window, choose the "Network" icon.

   3. In the Network Settings dialog box, choose the "Add Adapter" button.
      The Add Network Adapter dialog box appears.

   4. Select "<other> Requires disk from manufacturer"  from  the  list of
      network cards, and then press <Enter> button.

   5. Insert the SureCom driver disk in drive A , enter drive and pathname
      A:\WINNT35 which is the  path  where the driver  PNPNT.SYS and setup
       file OEMSETUP.INF are located, and then choose the OK button.

   6. The screen will appear "Input EthernetID" dialog box which is provide
      by PNPNT.SYS driver. This option is only required when you have more
      than one SURECOM EP-312 ISA PnP Adapters on this computer.Select SKIP
      if only one adapter is installed on this computer.

   7. NT will then perform the binding process.  If any additional network
      software options were installed,  you may be  prompted for  specific
      information for these packages.

   8. Restarting your system you will acquire network service.

   NOTES:
   ------
      *  Installing Multiple LAN Adapters:
         Enter  Windows NT and follow above setup procedure step 2, in the
         "Network Settings" dialog box ,  choose the "Configure.." button.
         The  "Input Ethernet ID"  dialog box appears  and input adapter's
         Ethernet ID. Last  step  to  select OK  and  close NETWORK SETUP.
         Select SKIP if only one adapter is installed on this computer.